Bubble Tea Shop Equipment Costs in 2026: Checklist and Price Guide
A practical equipment checklist for a bubble tea shop in Vietnam, with sizing by peak-hour cups, buy-or-lease maths and a budget on sample numbers.

What does it cost to equip a bubble tea shop, and what do you actually need? There is no single total, because the bill depends on how many cups you must serve at the busiest hour, whether you cook tapioca pearls on site, and whether you buy new, buy used or lease. The reliable way to budget is to size each machine from peak-hour demand, group the list into a few categories and collect real quotes for every line. This guide gives you the category list, the sizing maths and a budget template filled with sample numbers that you should replace with your own.
Key takeaways
- Start from peak-hour cups per hour, not from a picture of someone else's shop. Equipment is a capacity decision before it is a shopping decision.
- Cold storage and ice usually carry more risk than the flashy machines. A failed fridge costs stock; a failed ice maker stops the counter.
- Look beyond purchase price to consumables, electricity, servicing and resale value.
- Every number in this article is an assumption used to show the calculation, not a market price. Ask for at least three quotes on each major item.
How a bubble tea order flows through the equipment
Picture one cup moving across the counter: the cup is picked up, toppings go in, tea and milk are poured, the drink is shaken or blended, the lid is sealed and a label is stuck on. Each step uses a tool, and the slowest tool sets the pace for the whole counter. That is why a good equipment list follows the cup, not the catalogue.
Walk through the flow with your own menu and mark where a queue would form at 6 pm on a Friday. Those marked points are where money should go first. Steps that never queue can be served by cheaper or manual tools until real sales prove otherwise.
The four equipment groups
- Drink preparation: cup sealer, blender, shakers or mixer, tea brewing containers, scales, measuring tools, and cooking gear for pearls or jelly.
- Cold chain and ice: under-counter or upright refrigerator, freezer if needed, ice machine, insulated dispensers for tea and cooked toppings.
- Counter and fit-out: bar counter, sink, shelving, customer seating, lighting, signage, air conditioning or fans.
- Selling and operations: point-of-sale terminal, receipt and label printers, cash drawer, router, camera, power backup.
Keeping these groups separate lets you assign an owner to each and see which group is eating the budget. It also helps when you compare a takeaway kiosk with a seated shop: the fit-out group shrinks dramatically in a kiosk while cold chain stays almost unchanged.
Drink preparation: size from the bottleneck
Cup sealer
If you sell takeaway or delivery, a sealer is close to essential because a sealed cup survives a motorbike ride. Ask suppliers which cup rims and materials the machine accepts, how fast it seals, what the warranty covers and what each film roll costs per cup. Film is a recurring expense, so a cheap machine with expensive film can cost more over a year.
Blenders, shakers and mixers
If your menu has blended drinks, buy a blender sized for continuous use and think about where its noise will land in the shop. For shaken tea, time a trained worker making 20 cups in a row before you decide on automation. A machine is justified only if hand shaking is the step that queues.
Pearl and topping equipment
Cooking tapioca on site needs a stove, a large pot, a holding vessel and a sink for rinsing. Buying pre-cooked toppings removes most of that equipment but raises the ingredient cost per cup. Model both options with the same monthly volume, then compare total cost rather than the equipment line alone.
Cold chain, ice, counter and utilities
Fresh milk, cream, fruit and cooked toppings all depend on stable temperatures. Under-sizing cold storage leads to waste and daily restocking trips, while an unreliable unit can create food safety trouble.
- Size refrigerators for two selling days of perishables so a late delivery does not close the counter.
- Size the ice machine for the hourly ice need at peak, then ask the seller for output at high ambient temperature and warm incoming water, since catalogue figures are measured under friendly conditions.
- Buy insulated dispensers so the first and last cup of a shift taste the same.
Also write down each unit's rated power. Cold equipment runs all day, so electricity becomes a monthly cost that belongs in your operating budget even though it never appears on the equipment invoice.
Counter, fit-out and utilities
Design the counter around hand movement. The fridge, sealer and cup stock should sit within one pivot of the person making drinks. Put the sink close but separate from clean storage. Before ordering anything, ask an electrician to add up the rated power of every machine and compare it with what the premises can supply, and ask a plumber to check supply and drain points for the sink and ice machine. Fixing these after delivery is nearly always more expensive than choosing a slightly different machine up front.
Seating is a per-seat investment
For seated shops, divide fit-out spending by the number of seats and compare it with the sales each seat can realistically generate. A pretty room whose seats are empty most of the day does not pay back, while a kiosk with two benches might.
Selling equipment, software and the full checklist
Bubble tea has two quirks: every cup needs a label with sugar level, ice and toppings, and delivery orders land at the same moment as walk-in orders. Plan a POS terminal, a receipt printer, a label printer, a cash drawer and reliable internet, and confirm printer compatibility with your software before you buy. Decide what happens when the connection drops.
If you expect to open more than one outlet, review the multi-branch café and bubble tea management software page to see which applications exist, then test them against your own menu. To score several products side by side, the cafe management software comparison gives you a structure you can adapt to your own criteria.
Equipment checklist table
The table has no prices on purpose. Prices vary by brand, city and date, so the useful columns are how to size the item and what to check.
| Item | Need level | Size it by | Check before paying |
|---|---|---|---|
| Cup sealer | Near essential for takeaway | Cups per peak hour | Cup compatibility, warranty, film cost per cup |
| Blender | Only if blended drinks are on the menu | Blended cups at peak | Noise, cleaning time, rated power |
| Stove and pots for pearls | Only if cooking on site | Kilograms of toppings per shift | Fit with ventilation and sink position |
| Refrigerator | Essential | Two days of perishables | Temperature stability, power, service coverage |
| Freezer | Depends on menu | Frozen fruit and bulk stock | Usable volume, energy use |
| Ice machine | Near essential | Kilograms of ice per peak hour | Output in hot weather, water supply |
| Sink and water filter | Essential | Items washed per shift | Supply and drain connections |
| POS terminal and printers | Essential | Order channels and counters | Software compatibility, offline plan |
| Counter and shelving | Depends on format | Floor area and workflow | Easy-clean surfaces, working height |
| Small tools | Essential | Number of stations working at once | Spare sets for the next shift |
Worked example: a seated 20-seat shop (sample numbers)
All figures below are assumptions for illustrating the method, not market prices. Suppose a shop expects 60 cups in its busiest hour and uses a safety factor of 1.25 because orders arrive in bursts.
- Capacity target: 60 x 1.25 = 75 cups per hour.
- Ice: at an assumed 140 g per cup, 75 x 140 g = 10,500 g, or 10.5 kg of ice per peak hour. Multiply again for hot weather before choosing a machine.
- Sealing: at an assumed 10 seconds per cup, 75 cups need 750 seconds, about 12.5 minutes of every hour. One sealer is plenty.
- Making: if one person finishes a cup in an average of 45 seconds, one station handles 80 cups per hour. At 75 cups the station runs at 94 percent, which is too tight, so plan two stations for the weekend peak.
- Conclusion: spend on the second station, the ice machine and refrigerator volume. Do not buy automation for steps that run well below capacity.
Now the budget, in sample million-dong units to keep the arithmetic readable:
| Group | Sample budget | Share |
|---|---|---|
| Drink preparation | 35 | 20% |
| Cold chain and ice | 45 | 25.7% |
| Counter, fit-out, seating | 70 | 40% |
| Selling equipment | 15 | 8.6% |
| Small tools | 10 | 5.7% |
| Subtotal | 175 | 100% |
Add a 10 percent contingency for installation surprises: 175 x 1.10 = 192.5 sample units. Keep that contingency apart from the cash you need for ingredients and early rent.
Buy new, buy used or lease
- New suits the items whose failure stops the counter: refrigeration, ice machine, sealer.
- Used suits stainless steel tables, shelving and simple tools. Insist on a trial run for any electrical item and ask why it is being sold.
- Lease or instalments save upfront cash but add financing cost. Compare total payments over the full term with a single purchase.
Depreciation and the cost per cup
Convert the one-off spend into a monthly figure: monthly depreciation equals purchase price minus expected resale value, divided by months of use. With 192.5 sample units, a 12.5 resale estimate and 60 months of life, depreciation is (192.5 - 12.5) / 60 = 3 sample units a month. If the shop sells 3,000 cups a month, equipment adds 1,000 sample dong to each cup. If your menu price cannot absorb that figure alongside ingredients, packaging and labour, the equipment plan is too heavy.
Lease or buy: a small comparison (sample numbers)
Assume an ice machine costs 28 to buy, resells for 3 after 48 months and needs 0.25 servicing per quarter. Buying costs 28 - 3 + (16 x 0.25) = 29. Leasing at an assumed 0.85 a month including service costs 48 x 0.85 = 40.8. The gap, 11.8, is the price of keeping cash free at the start. If that cash would otherwise run out before the shop reaches steady sales, leasing can be rational; if not, buying wins.
Running costs that follow the machines
Equipment does not stop costing money after delivery. Track these lines separately:
- Seal film, cups, straws and labels for every drink sold.
- Electricity for cold storage, the ice machine and air conditioning.
- Scheduled maintenance such as descaling the ice machine, changing filters and checking door seals.
- Software subscriptions. The OneXEOS pricing page shows how plans are presented, which helps when you build the software line of your budget.
Common budgeting mistakes
- Copying another shop's list instead of sizing from your own peak hour.
- Forgetting utilities, then paying for rewiring or plumbing after the machines arrive.
- Comparing purchase prices only, ignoring film, power and servicing.
- No spare for single points of failure, such as a second tea dispenser or a backup label printer.
- Buying used refrigeration untested, then discovering weak cooling in the first heat wave.
- Spending all the cash on equipment, leaving nothing for stock and the slow first months.
Checklist for requesting quotes
- Each quote names the model, capacity, voltage, dimensions and warranty period.
- It states whether delivery, installation and staff training are included.
- The delivery date is written down, with a remedy if it slips past your opening date.
- Repair terms are clear: who comes on site, how fast and at whose cost.
- Consumables tied to the machine are listed with a unit cost.
- You hold at least three dated quotes for every major item.
- Total rated power has been compared with the supply at your premises.
Frequently asked questions
What is the minimum equipment for a small bubble tea counter?
A refrigerator, a reliable source of ice or an ice machine, a cup sealer for takeaway, tools and a pot for toppings, a sink, basic preparation tools and a POS setup. Blenders and automatic shakers can wait until sales data shows a bottleneck.
Is secondhand equipment safe for a new shop?
For tables and shelving, usually yes. For refrigeration and sealers, only with a trial run, a clear reason for sale and some form of warranty, because a breakdown mid-service is costly.
How many quotes should I collect?
Three per major item is a sensible minimum. Compare like with like: same capacity, same warranty, same delivery and installation terms.
How much contingency should I add?
Many owners add around 10 percent as a starting point, then raise it if the premises are old or need wiring or plumbing work. Treat it as a separate pot from working capital.
Should I decide on POS equipment early?
Yes. Printers, terminals and network points affect counter layout and sockets, and you need time to load the menu and rehearse orders before opening day.
Why does this guide not list prices?
Prices change with brand, city and date, so any figure printed here would age quickly or mislead. The sample numbers only show how to calculate; your quotes supply the truth.
Next steps
- Write down expected peak-hour cups and time each preparation step with your actual staff.
- Find the bottleneck and size equipment for it first.
- Build the four-group budget, add contingency and calculate monthly depreciation.
- Collect three quotes per major item and compare total cost of ownership.
- Check electrical and plumbing capacity at the premises before placing orders.
- Rehearse a full service, from order to sealed cup, at least a day before opening.
Reminder: all numbers here are illustrative assumptions. Replace them with your own figures and actual supplier quotations before you commit money.



